Tire racks & rim racks
Tire racks are suitable for storing car tires, rims and complete wheels - of course as gently as professionally. TOPREGAL tire racks are designed to minimize the contact area of the tires on the rack. Thanks to the stepped crossbars, this is optimally distributed over the entire tire. No matter if tires, rims or complete wheels: For all common tire sizes we offer the suitable depth at our tire racks.
Tyre racks Top seller
Tire racks of the LR2000 type
The right rack depth for your tire sizes*
13 to 15 inches
16 to 18 inches
19 to 29 inches
* Our recommendations regarding shelf depth and tire size are based on the average tire size when using the specified inch size.
Number of possible levels (recommendations
)based on tire sizes 17 inches + 18 inches.
Height of the tire rack
2.0 meters = 3 levels
2.5 meters = 3 levels
3.0 meters = 4 levels
3.5 meters = 5 levels
4.0 meters = 5 levels
Tire rack: mobile or stationary?
With the height-adjustable base with roller, your tire rack or tire trolley can be adjusted up to 40 centimeters in height. This results in individually adjustable heights from 89 to 254 centimeters, depending on the type and basic size selected.
Bay, shelf and point load
Bay load stationary: maximum 2,000 kilograms
Bay load mobile: maximum 500 kilograms
- Total load capacity between two rack uprights
Max. shelf load 400 kilograms per level
- Total load capacity per truss level or per shelf
Point load per base plate with evenly distributed load maximum 1,000 kilograms
- One point load generated by the rack upright on the floor
Floor anchoring foot plate
The floor anchoring is done by using bolt anchors M8x55
- Drill holes: 8mm Ø, 80mm deep
- Blow out holes
- Hammer the bolt anchor into the drilled hole
- Tighten the nut firmly with an open-end wrench or similar tool
If the height of the top shelf level is less than five times the depth of the shelf, the shelf does not need to be fixed or secured against tipping. Please make sure to fasten the bolt anchors professionally. Our in-house assembly team will gladly take over the proper assembly of your tire racks.
- Axle dimension describes the width of a shelf bay as well as the distance between two uprights.
- We offer axle dimensions in widths of 110 and 220 centimeters.
- Axle dimensions can be freely combined with each other.
- Configure tire racks individually with your desired bay lengths. Due to the modular design, the racks can be extended at any time.
Securing the cross beams
Required individual parts: Pre-assembled rack upright, truss, securing pin.
Set up the pre-assembled uprights, hang the trusses at the desired height in the upright profile on both sides and insert the locking pins in the hole provided in the truss. The trusses are hung in a grid of 50 millimeters. Please note to mount the last crossbar at least 50 centimeters before the end of the upright.
Tire rack with supports
You can equip individual levels of your tire racks with a shelf to store useful items such as tools for mounting, rim cleaner, grease and wheel nuts. This way, a tire rack can be customized to meet individual needs.
Wall mounting / Connecting
For rack heights up to 2.5 meters, we recommend the use of two spacers.
From a height of 3 meters we recommend the use of three spacers.
All assembly material is included in the price and scope of delivery.
Operational safety: DIN and DGUV compliant tire racks
Collision protection for racking systems
Collision protection to prevent possible damage to the rack upright.
According to DIN EN 15365 and DGUV 108-007, corner areas must be equipped with collision protection.
Our collision protection is tested and certified according to DGUV 108-007 (formerly BGR234).
Each collision protection is supplied including four bolt anchors for floor fastening.
Accessories - suitable for LR2000
Tire racks for professional storage of tires and rims
In tire racks you store car tires, rims and complete wheels both gently and professionally. The purchase of a tire rack is therefore already worthwhile if you change the car tires twice a year, because the storage of the complete wheels or tires is extremely gentle on the material. Thus you can avoid pressure marks by wrong storage purposefully. TOPREGAL tire racks are designed to minimize the contact area of the tires on the rack. Thanks to the step crossbars, this contact surface is optimally distributed over the entire tire.
It does not matter whether you want to store tires, rims or complete wheels: We offer the right rack depth for all common tire sizes. Three available depths can be easily selected in the configurator. In the smallest version, the basic rack offers space for eight wheels. Thanks to the modular design, any number of tire racks can be combined and extended. The crossbars can also be individually hooked in at different heights.
The assembly of the rim rack is very simple, as it is a plug-in system. The crossbars are simply hooked into the uprights of the rack. If you prefer to store the tires on the wall, you can order the available wall bracket directly and attach the tire rack to the wall with it. For transportation to the car or other places of use, we also offer our tire storage systems as tire carts. Equipped with four swivel castors, our mobile tire racks offer maximum flexibility and are easy on the back.