Pallet rack type PR9000
- rack height 2m - 7,5m
- upright depth 110cm or 80cm
- Load capacity up to 1000kg per pallet
- Levels individually height adjustable in 5cm increments
- Different supports
- Extensive accessories
- DIN EN 15512 tested
- Easy to assemble
- Best price
- All parts included
Assembly instructions & technical data sheet
Quality of our products
Voluntary testing of our pallet racks
In order to subject ourselves to external quality tests, we have our products inspected annually.
The racks are tested for load, rigidity and stability.
The published load capacity specifications for our racks are based on the DIN EN 15512 standard.
The maximum shelf and bay loads are listed on the load plates included in the delivery to confirm the specifications
Painted for indoor use
Click here for prices and product overview
Hot-dip galvanized for outdoor use
Hot-dip galvanized racks for outdoor use
Overview uprights pallet rack PR9000
A complete rack upright consists of cold-rolled upright profiles in U-shape with outwardly bent ends plus the cross and diagonal braces in the form of C-profiles.
Field and point load
Shelf load max . 3000KG
- With evenly distributed load per truss level
- Max. Max. shelf load depends on truss length
Mass of the trusses
Point load per foot plate
- Forces acting on the floor in the form of point load
Floor anchoring footplate
The floor anchoring is done by using bolt anchors M12x100
- For this purpose, the appropriate holes are first drilled with a suitable drill (12cm diameter).
- The bolt anchor is hammered in with the floor holder.
- Finally, the nut is fastened.
- Thus, the shelf is sufficiently and securely anchored.
Please note: The bolt anchors must be fastened professionally.
Our in-house assembly team will gladly take over the professional assembly of your shelves.
- The bay length describes the width of a rack bay as well as the distance between two pallet rack uprights.
- Bay lengths are available in 180cm, 270cm and 360cm.
- The different bay lengths can be freely combined with each other.
- Configure your pallet rack individually with your desired bay lengths. Our racks are also expandable at any time due to the modular construction.
Assembly of the cross beams
Required individual parts:
Pre-assembled shelf upright, traverse, locking pin
- The crossbars can be hooked into the upright profile at the desired height.
- The safety pin protects the crossbar against accidental levering out.
- The height of the individual truss levels can be adjusted in 5cm increments.
Pallet rack with supports
Wooden shelf support
The wooden shelf support consists of a chipboard (38mm) and 4 Z-sheets. The wooden shelf is placed on the crossbeam and fixed and stabilized with the help of centering plates.
Load capacity without the use of depth bars: 1500kg
ATTENTION: If the load is on the crossbars, you always have the load capacity of the crossbar pair available. Independent of the shelf support.
Shelf support made of grating
Hot galvanized grating to be placed directly on the truss pairs.
Modules a 88cm width
mesh size 9,9cm x 9,9cm
Load capacity 800kg per module
Optimal for storage of hazardous materials or liquids
ATTENTION: If the load is on the cross beams, you always have the load capacity of the pair of cross beams available. Independent of the shelf support
Steel shelf support
Steel shelf to be placed directly on the truss pairs.
Modules a 88cm width
load capacity 1000kg per module
Available in depths 110cm and 80cm
Optimal for storage of liquids, such as varnishes or oils, because washable.
ATTENTION: If the load is on the crossbars, you always have the load capacity of the pair of crossbars available. Independent of the shelf support
Double rack rows
For space-saving installation of your pallet racking system, it is recommended to install two racks parallel one behind the other.
In this case, it makes sense to connect the racks using spacers to align them neatly and generate additional stability.
In order to prevent the rear pallet from being pushed out during loading, we recommend installing push-through guards on one side of the double rack row.
The push-through protection prevents the pallets from accidentally shifting or falling to the rear.
Bolt-on plates as well as screws for fastening to the racking system are included in the price and can be supplied compatible for all common pallet racking systems.
The push-through protection is part of the safety-related accessories for pallet racks. They are placed on the sides of the racks not intended for loading and unloading. They are required by law in the case of public traffic behind the racking or parallel racking.
Regulations according to DIN EN 15635 and DGUV 108-007
Collision protection for racking systems
Collision protection to prevent possible damage to the rack upright.
Corner areas must be equipped with a collision protection according to DIN EN 15365 & DGUV 108-007 in case of forklift traffic.
Our collision protection is tested and certified according to DGUV 108-007 (formerly BGR234).
Each collision protection is delivered including four bolt anchors M12x100mm for floor mounting.
Accessories - suitable for PR9000
Different versions available > to the supports
Direct > to the depth bars
Direct > to the drum support
Direct > to the safety accessories
Direct > to the crash barriers
Direct > to the push-through protection
Mesh rear wall
Different widths available > to the grid back walls
Direct > to the spacer
Different widths available > to the magnetic tapes
Direct > to the load distributor
Height compensation plates
Direct > to the height compensation plates
Pallet rack storage technology from TOPREGAL
We sell only new pallet racks tested according to DIN EN 15512, which meet all legal requirements.The pallet rack consists of uprights (incl. braces, fuplates) and cross beams on which the stored goods are stored. The cross beams, powder coated in pure orange RAL 2004, are hooked into the pallet rack uprights in a simple plug-in construction and secured with safety pins. The height of the crossbars can be adjusted individually in increments of 80mm. The load capacity per Euro pallet is 1000kg - this corresponds to a shelf load of 3000kg (load capacity per level). In our standard assortment we have pallet rack cross beams in 180cm (for 2 Euro pallets), 270cm (for 3 Euro pallets) and 360cm (for 4 Euro pallets). Other bay lengths are available on request.
The pallet rack uprights, powder coated in signal blue RAL 5005, consist of a front and rear upright profile, which are bolted together by the screwed-in cross and diagonal braces, as well as 2 galvanized foot plates, which are bolted to Bolt anchors screwed into the floor. The standard depth of the pallet rack uprights is 110cm. This depth is used for longitudinal storage of Euro pallets. However, we also offer a depth of 80cm for our pallet racks, for example to store disposable pallets or other goods. The bay load (load capacity between 2 uprights) is 9000kg. In our standard assortment we have heights from 200cm - 550cm. On request we also offer pallet racks up to 7.5m high, which can be supplied with higher bay loads.
Pallet racks with grating supports or chipboard floors can also be found in our complete offers and can thus be selected through the configurator. In thePallet rack componentsconfigurator it is also possible to order single gratings,Wooden shelves or Steel shelves to purchase in order to customize your shelving. The legally required load plates are always included in the price and delivery. Any assembly material required for proper assembly such as Bolt anchors for floor mounting, safety pins to secure the crossbars, screws, nuts, washers etc. are also included in the price.
All pallet rack complete offers are in stock and will usually be delivered to you within 1-3 working days after receipt of order.
Due to our Central warehouse a speedy delivery can be guaranteed.Shipment of goodsYou can also find an extensive and safety-relevant range of accessories under Pallet Racking Accessories. Due to this flexible rack type, it is possible at any time to expand the rack with individual rack components at a later date and to adapt it to your requirements.
If you need other load capacities or dimensions, please contact us!