Cart

All products

4.7m pallet rack (type: PR9000F) 2m high / 110cm deep with 2 levels for 15 euro pallets (galvanised)
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
215 reviews

Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    4,7m
  • Height
    2m
  • Depth
    110cm
  • Number of layers
    2
  • Beam length
    270cm
  • Max. load per pallet
    1000KG
  • Max. load per layer
    3000KG
  • Rack layer
    Without
  • Surface
    Galvanised
Description

INFO: Due to an adapted and improved galvanisation, there may be visible defects. The improved galvanisation is above the European required level and provides stronger corrosion protection.

New, complete pallet rack with a tested load capacity of 3000kg per beam level, corresponding to 1000kg per pallet and a max. unit load capacity (total load capacity between 2 rack uprights) of 9000kg. Alternatively, our pallet racks are also available in a painted design. The beams (270cm long), galvanised, are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The height of the beams can be individually adjusted in increments of 50mm. The pallet-rack uprights (galvanised) consist of a front and rear upright profile, which are screwed together by the screwed-in cross and diagonal struts, as well as 2 foot plates, which are fixed to the floors using M12 x 100mm bolt anchors to ensure stability. This flexible type of rack can be expanded with individual shelf components and adapted to your requirements at any time: both by installing further levels and adding additional units to the length (possible unit lengths 180cm, 270cm & 360cm). All assembly material such as foot plates, screws, Z-plates, bolt anchors and all small parts required for assembly are included.

Safety-relevant and useful accessories for this type of rack, such as collision protection or push-through protection can be found here.
Delivery volume
  • 3 pallet-rack uprights 200cm high / 110cm deep incl. strutting, unit load capacity: 9000kg (galvanised)
  • 4 pallet-rack beams 270cm wide incl. safety pins, compartment load: 3000kg (galvanised)
  • 4 pallet-rack beams 180cm wide incl. safety pins, compartment load: 2000kg (galvanised)
  • All accessories such as foot plates, screws, nuts and all material required for assembly are included
  • Load capacity labels according to BGR234 (DGUV: 108-007) specifications
  • Assembly instructions
Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    4,7m
  • Height
    2m
  • Depth
    110cm
  • Number of layers
    2
  • Beam length
    270cm
  • Max. load per pallet
    1000KG
  • Max. load per layer
    3000KG
  • Rack layer
    Without
  • Surface
    Galvanised
Reviews
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(ᴓ 4.9 / 5.00)
5 stars
(194)
4 stars
(21)
3 stars
(0)
2 stars
(0)
1 star
(0)
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
07.09.2022 based on Art.-Nr: 159228
Everything Best
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
24.08.2022 based on Art.-Nr: 7346
Contact super
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
03.08.2022 based on Art.-Nr: 1345
As ordered, very good price-performance ratio
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
25.07.2022 based on Art.-Nr: 51251
right on target
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
25.07.2022 based on Art.-Nr: 70772
perfect fit

Important information about our racks

All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.

Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.

trusted shops
Our Reviews from topregal.co.uk
Excellent
4.86 /5.00