Mobile racks & tables
Mobile racks & tables
Mobile tire racks & tire carts
Mobile storage racks & work tables
Mobile sloping floor racks & sloping floor tables
Freely configurable mobile shelving & trolleys
Overview uprights - mobile shelving & tables
Painted uprights - heights
- variable heights
- Bay load: 500kg
- Complete upright incl. bracing, mounting hardware and height adjustable feet and casters
- The axis dimension describes the width of a shelf bay as well as the distance between two uprights
- We offer axle dimensions in widths of 110cm and 220cm
- Configure your mobile shelf or mobile table individually with your desired bay lengths.
Securing the trusses
Required parts: Pre-assembled shelf upright, truss, securing pin.
Set up the pre-assembled uprights and hook the crossbars into the upright profile on both sides at the desired height. Insert locking pins into the hole provided in the crossbar.
The crossbars are hung in a grid of 50mm.
Please note: Mount the last truss at least 50cm before the end of the upright!
Supports for mobile shelves & tables
(Optional for the tire rack)
Individual levels can also be equipped with a shelf to store useful items such as tools for mounting, rim cleaner, grease, wheel nuts, etc. In this way, mobile shelves or mobile tables/trolleys can be adapted to individual needs.
Assembly Height adjustable base & castor
Required parts: Stand profile, Height adjustable foot, Movable foot with brake, Screws M8x20, Washers, Nuts M8
The castor is attached to the height-adjustable foot section from below using 4 M8x20 screws, M8 nuts and washers.
The stand profiles are slid over the foot part and fastened at the desired height with 3 M8x20 screws and washers each. (adjustable in 5cm increments)
Please note: The roller can be (dis)mounted variably, depending on the requirements. Thus, the table or shelf can also be converted to a stationary or mobile version afterwards.
Rear & side walls
Back and side walls can be mounted between the upright profiles as push-through protection, have a hole spacing of approx. 2.8cm and are therefore compatible with common applications.
Side walls available in depths 60cm + 80cm Back walls available in widths 110cm + 220cm
Tool holder sets
Our tool and machine holder sets are designed for use with our in-house perforated walls and are ideal for storing all types of tools. The sets include various tool holders in different lengths and designs. The individual elements can be attached to the perforated walls using a simple plug-in system without the need for mounting materials.
Mobile lockers & cabinets
Our metal lockers & cabinets are compatible with the storage rack's step crossbars due to their special design.
Thus, the lockers can simply be placed on top without further assembly and fix themselves.
This allows the application as a mobile cabinet and locker variant
The high-quality, two-tone metal cabinets can withstand even the toughest everyday workshop conditions.
Operational safety / regulation - DIN EN 15635, DGUV 108-007
Collision protection for racking systems
Collision protection to prevent possible damage to the rack upright.
Corner areas must be equipped with a collision protection according to DIN EN 15365 & DGUV 108-007 for forklift traffic.
Our collision protection is tested and certified according to DGUV 108-007 (formerly BGR234).
Each collision protection is delivered including four bolt anchors M12x100mm for floor fixing.
Accessories - suitable for mobile shelves & tables
Lockers & Cupboards
Direct > to the cabinets & lockers
Direct > to the bumpers for racks
Hole & side panel
Different versions > to the hole & side panels
Direct > to the round crossbars
Different widths available > to the Magnetic Tapes
Height compensation plates
Direct > to the underlay/balancing plates
Mobile racks and mobile tables for flexible applications
All mobile shelves, or rolling shelves, shown here in the subcategories are variants put together by us as complete shelves, which in our experience meet the greatest demand of our customers. We have a rolling solution for almost every customer requirement for a flexibly usable shelf. All models are equipped with swivel castors including brake function to ensure maximum freedom of movement and safety. Once the castors are removed, the mobile shelf becomes a stationary heavy-duty shelf in a matter of seconds.
The storage rack forms the basis for the countless variations for the mobile racks and mobile tables shown here. With just a few clicks, a tire cart turns into a mobile storage rack, thanks to a wooden support. If you add a round crossbar at the front and hang the support just a few grids higher, you get a mobile sloping shelf in no time. If this is smaller than 1.30m, it can be used as a mobile work table or mobile workbench. A matching perforated wall for tool holders, tool cabinets and other accessories leave nothing to be desired in terms of flexible everyday helpers.