Machine guard 3x3 configuration with open side and sliding door
★ ★ ★ ★ ★
★ ★ ★ ★ ★
on the value of your cart!
Material thickness3 mm
Max. Energy impact1.600
- The machine guard fencing system reliably separates large production machines from walkways and vehicle paths.
- With a high load capacity of 1.600 J, the guard can withstand high impacts and shocks, providing a high level of workplace safety
- The system is lightweight, practical and modular, making it flexible and easy to set up
- The 2.000 mm tall system can be used to safely fence off entire production lines as well as stand-alone machines
Simple, secure, modular
The machine guard fencing system from TOPREGAL. Its modular design makes it simple and straightforward to separate off different areas of a production hall, mainly to protect workers from machines such as bending machines, saws or even robotic arms. It allows autonomous devices to be easily separated from walkways and vehicle paths to enable the machine to work without interference, but also to ensure safety in the workplace. There are many possible use cases for the system. For example, it can be used to restrict access to machine sides or separate off whole production lines to guarantee unobstructed production.
The 2.000 mm tall system stops machines from working outside their own range of motion and prevents workers from reaching into machines and risking injury. The yellow/black signal colour has been deliberately chosen to guarantee maximum safety. The close mesh (aperture size 20 x 100 mm) prevents hands from getting in accidentally. The corner and side posts on the guard fencing are each secured to the floor with 2 bolt anchors. The 3 mm thick fencing struts are designed to be robust and therefore have a long service life.
Square, practically configured
The machine guard system from TOPREGAL allows flexible and individual configuration to cover different applications. The compact 3x3 configuration with sliding door creates a small, separate area where a workstation can be easily separated from pathways and one or more machines can also be safely enclosed. The space-saving sliding door does not require any room to swing open, which is a particularly great advantage in warehouses and production facilities. The open side of this configuration variant can either be placed directly against a wall or be the start of an entire production line. Simply choose your machine guards to guarantee sufficient safety at the workplace.
Slide to the side and enter
Sliding doors are the space-saving alternative to ordinary swing doors. Where a swinging door requires a 1 m radius to be left free to the inside or outside in order to be able to open it completely, you simply slide the 1200 x 2000 mm sliding door aside for the machine guard system. This saves space and works smoothly. This allows you to create one or more access points to your machine, e.g. to carry out maintenance work or to load raw material. The sliding door can be embedded at any point in the system of machine guard walls. This allows you to create access to your machine at several points at the same time.
- 1 x Machine guard 3x3 configuration with open side and sliding door
- 12 months warranty