Post hole digger EBM540 incl. earth auger for tractor, diameter 300mm, depth 600mm
★ ★ ★ ★ ★
★ ★ ★ ★ ★
on the value of your cart!
Sinking piles without any problems
This is possible with our post hole digger EBM540. With a rotation speed of 540 rpm, the PTO enables the auger to dig through the hardest and driest soil. The auger consists of two clockwise rotating augers with interchangeable hardened cutting edges at the tip. In order to be able to drill smoothly into the ground, this auger is also equipped with an exchangeable tip.
The low dead weight of 65 kg and the compact dimensions of 750 x 1800 x 660 mm, of the entire superstructure, allow the post hole digger to be easily mounted on a category 1 three-point hitch. The 1290 mm long PTO shaft hangs below the linkage. The post hole digger is equipped with both a slip clutch and a shear bolt. These protective devices prevent damage to the engine or gearbox should the auger ever get stuck in ground that is too firm.
The transmission power of the tractor to which the post hole digger, including the power take-off shaft and earth drill are attached, should be between 25 and 50 HP.
The drill suitable for the post hole digger
The massive but effective EB300 auger enables holes to be cut in soft to hard ground. The drilling diameter is 300 mm, with a maximum drilling depth of 600 mm. This is possible due to the length of 1200 mm of the whole drill and the hardened and exchangeable drill bits. Both the tip and the cutting edges, which are attached directly to the start of the auger, are made of hardened steel and are therefore ideally suited for penetrating even harder ground. The low weight of the auger of 24 kg allows a pleasant handling and comfortable mounting on the post hole digger.
The right tool makes the difference. Decide now for the post hole digger EBM540 incl. earth drill EB300.
- 1 post hole digger, cat 1 suspension
- 1 PTO shaft
- 1 earth auger diameter 300mm, depth 600mm
- 1 year warranty