6.4m cantilever rack (type: KR3000 galvanised) 2m high single-sided with 3 levels 50cm deep
★ ★ ★ ★ ★
★ ★ ★ ★ ★
16 reviews
★ ★ ★ ★ ★
★ ★ ★ ★ ★
20%
Discounts of up to 10%
on the value of your cart!
on the value of your cart!
Overview / specification
-
Max. load per arm500 kg
-
Width6.400 mm
-
Height2.000 mm
-
Depth500 mm
-
Number of levels3
-
Beam length1.500 mm
-
Max. Load per level500 kg
-
Versionone-sided
-
Rack layerWithout
-
SurfaceGalvanised
-
ModelKR3000
Description
New, complete cantilever rack – single-sided design – 6.4m wide, 200cm high and 3 cantilever levels with a cantilever depth of 50cm. The maximum load per cantilever is 500kg. The unit load capacity (total load capacity between two uprights) is 1500kg.
This cantilever rack is characterised by its particularly robust construction.
The surface of this upright is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores or similar.
The foot parts can also be used as a storage level
To prevent the load from accidentally slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.
The external dimension of this rack is 6.4m.
The axial dimension (inner dimension between two uprights) is always 150cm.
All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
This cantilever rack is characterised by its particularly robust construction.
The surface of this upright is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores or similar.
The foot parts can also be used as a storage level
To prevent the load from accidentally slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.
The external dimension of this rack is 6.4m.
The axial dimension (inner dimension between two uprights) is always 150cm.
All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
Delivery volume
- 5 complete uprights 2m high for 50cm cantilevers single-sided up to 1500kg (galvanised)
- 4 cantilever-rack units (struts) for 2m height, axial dimension 1.5m (galvanised)
- 15 cantilevers 50cm deep up to 500kg (galvanised)
- All material required for assembly such as screws, nuts, bolt anchors as well as assembly instructions and load capacity labels are included
Discounts of up to 10%
on the value of your cart!
on the value of your cart!
Overview / specification
-
Max. load per arm500 kg
-
Width6.400 mm
-
Height2.000 mm
-
Depth500 mm
-
Number of levels3
-
Beam length1.500 mm
-
Max. Load per level500 kg
-
Versionone-sided
-
Rack layerWithout
-
SurfaceGalvanised
-
ModelKR3000
Downloads
Reviews
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(ᴓ 5 / 5.00)
5 stars
(16)
4 stars
(0)
3 stars
(0)
2 stars
(0)
1 star
(0)
08.02.2023 based on Art. No. 28008
The delivered product corresponded 100% to the description
Read original
13.01.2023 based on Art. No. 6628
everything fits
Read original
07.09.2022 based on Art. No. 24399
Everything Best
Read original
Show all
All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.
Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.
Suitable products
.jpg)
