Cart

All products

1.6m cantilever rack (type: KR3000 galvanised) 2.5m high double-sided with 3 levels 100cm deep
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
7 reviews

Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Max. load per arm
    500kg
  • Width
    1,6m
  • Height
    250cm
  • Depth
    100cm
  • Number of layers
    3
  • Beam length
    1,50m
  • Version
    double-sided
  • Rack layer
    Without
  • Surface
    Galvanised
  • Model
    KR3000
Description
New, complete cantilever rack – double-sided design – 1.6m wide, 250cm high and 3 cantilever levels with a cantilever depth of 100cm. The maximum load per cantilever is 500kg. The unit load capacity (load capacity between two uprights) is 2000kg.

This cantilever rack is characterised by its particularly robust construction. The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores or similar.

The foot parts can also be used as a storage level.

To protect the load from accidental slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.

The external dimension of this rack is 1.6m.
The axial dimension (inner dimension between two uprights) is always 150cm.

All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.

Note on shelf width:
The specified shelf width for this basic rack refers to the distance from the centre of one upright to the centre of the other upright. The outer dimension of the complete rack including foot part is approx. 10cm wider.
Delivery volume
  • 2 complete uprights 2.5m high for 100cm cantilevers double-sided up to 2000kg (galvanised)
  • 1 cantilever-rack units (struts) for 2.5m height, axial dimension 1.5m (galvanised)
  • 12 cantilevers 100cm deep up to 500kg (galvanised)
  • All material required for assembly such as foot plates, screws, nuts, bolt anchors is included
  • Load capacity labels according to DGUV 108-007 (formerly BGR 234) specifications
  • Assembly instructions
Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Max. load per arm
    500kg
  • Width
    1,6m
  • Height
    250cm
  • Depth
    100cm
  • Number of layers
    3
  • Beam length
    1,50m
  • Version
    double-sided
  • Rack layer
    Without
  • Surface
    Galvanised
  • Model
    KR3000
Reviews
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(ᴓ 5 / 5.00)
5 stars
(7)
4 stars
(0)
3 stars
(0)
2 stars
(0)
1 star
(0)
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
07.09.2022 based on Art.-Nr: 24399
Everything Best
Read original
Important information about our racks

All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.

Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.

trusted shops
Our Reviews from topregal.co.uk
Excellent
4.86 /5.00